H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 889)

868
Figure 924 Configuring an IKE peer
5. Configure an IPsec policy:
a. From the navigation tree, select VPN > IPSec.
b. Click the Policy tab.
c. Click Add.
d. Enter the policy name map1.
e. Enter the sequence number 10.
f. Select the IKE peer peer.
g. Select the IPsec proposal tran1 and click <<.
h. Enter the ACL number 3101.
i. Select Enable for RRI.
j. Enter the next hop address 2.2.2.2.
k. Click Apply.