H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 439)

418
5. Configure local MAC authentication:
a. In the Security Setup area, select Open-System from the Authentication Type list.
b. Select the Port Set box, and select mac-authentication from the Port Mode list.
c. Select the MAC Authentication box, and select branch.net from the Domain list. Make sure the
mandatory authentication domain and the ISP domain in the configuration file are the same.
d. Click Apply.
Figure 433 Configuring local MAC authentication
6. Enable wireless service:
a. Select Wireless Service > Access Service from the navigation tree.
b. Select the mac-auth box.
c. Click Enable.
Figure 434 Enabling wireless service