Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 581
560
4.
Configure the ISP domain to use local authorization for login users:
a.
From the navigation tree, select Authentication > AAA.
b.
Click the Authorization tab.
c.
Select the domain test.
d.
Select the Login AuthZ option, and then select the authorization method Local.
e.
Click Apply.
A configuration progress dialog box appears.
f.
After the configuration progress is complete, click Close.
Figure 588 Configuring the ISP domain to use local authorization for login users
5.
At the CLI, enable the Telnet service and configure the AC to use AAA for Telnet users.
<AC> system-view
[AC] telnet server enable
[AC] user-interface vty 0 4
[AC-ui-vty0-4] authentication-mode scheme
[AC-ui-vty0-4] quit
Verifying the configuration
Telnet to the AC and enter the username telnet@test and password abcd. You are serviced as a user in
domain test.