H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 288)

267
Table 97 Static NAT configuration task list
Task Remarks
Creating a static address mapping
Required.
Static NAT supports two modes, one-to-one and net-to-net.
Enabling static NAT on an interface
Required.
Configure static NAT on an interface.
Configuring an internal server
Task Remarks
Configuring an
internal server
Required.
After you map the private IP address/port number of an internal server to a public IP
address/port number, hosts in external networks can access the server located in the
private network.
Configuring a DNS
mapping
Optional.
The DNS mapping feature enables an internal host to use the domain name to access
an internal server located on the same private network, while the DNS server resides
on the public network.
Creating an address pool
1. From the navigation tree, select Network > NAT.
The Dynamic NAT page appears.
Figure 240 Dynamic NAT