Snmpv3 configuration task list – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 152
131
Task Remarks
Optional.
After creating SNMP views, you can specify an SNMP view for an
SNMP group to limit the MIB objects that can be accessed by the
SNMP group.
Required.
Configuring SNMP trap function
Optional.
Allows you to configure that the agent can send SNMP traps to the
NMS, and configure information about the target host of the SNMP
traps.
By default, an agent is allowed to send SNMP traps to the NMS.
Displaying SNMP packet statistics
Optional.
SNMPv3 configuration task list
Perform the tasks in
to configure SNMPv3.
Table 52 SNMPv3 configuration task list
Task Remarks
Required.
The SNMP agent function is disabled by default.
IMPORTANT:
If SNMP agent is disabled, all SNMP agent-related configurations are
removed.
Optional.
After creating SNMP views, you can specify an SNMP view for an SNMP
group to limit the MIB objects that can be accessed by the SNMP group.
Required.
After creating an SNMP group, you can add SNMP users to the group
when creating the users. Therefore, you can realize centralized
management of users in the group through the management of the group.
Required.
Before creating an SNMP user, you need to create the SNMP group to
which the user belongs.
Configuring SNMP trap function
Optional.
Allows you to configure that the agent can send SNMP traps to the NMS,
and configure information about the target host of the SNMP traps
By default, an agent is allowed to send SNMP traps to the NMS.
Displaying SNMP packet
statistics
Optional.