H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 603
582
7.
Enable the wireless service:
a.
On the access service list page, select the wireless service named 802.1x-auth.
b.
Click Enable.
A progress dialog box appears.
c.
After the configuration process is complete, click Close.
Figure 611 Enabling the wireless service
8.
Bind the AP's radio mode with the wireless service:
a.
In the wireless service list, click the
icon for wireless service 802.1x-auth.
b.
Select the AP named ap1 with the radio mode 802.11n(2.4GHz).
c.
Click Bind.
A progress dialog box appears.
d.
After the configuration process is complete, click Close.
Figure 612 Binding the radio mode with the wireless service
9.
Enable 802.11n (2.4GHz):
a.
From the navigation tree, select Radio > Radio.
b.
Select the AP named ap1 with the radio mode 802.11n(2.4GHz).