H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 276
255
Item Description
Port Number
Set the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
IMPORTANT:
When you modify a port, make sure the port is not used by another service.
ACL
Associate the HTTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
HTTPS
Enable HTTPS
service
Specify whether to enable the HTTPS service.
The HTTPS service is disabled by default.
Certificate
Select a local certificate for the HTTPS service from the Certificate
dropdown list.
You can configure the certificates available in the dropdown list in
Authentication > Certificate Management. For more information, see
"
."
IMPORTANT:
•
The service management, portal authentication, and local EAP service
modules always reference the same PKI domain. Changing the
referenced PKI domain in any of the three modules also changes the PKI
domain referenced in the other two modules.
•
If no certificate is specified, the HTTPS service generates its own
certificate.
Port Number
Set the port number for HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
IMPORTANT:
When you modify a port, make sure the port is not used by another service.
ACL
Associate the HTTPS service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.