Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 487
466
Verifying the configuration
1.
Display the roaming information of the client:
a.
Select Summary > Client from the navigation tree.
b.
Click the Roam Information tab.
c.
Click the desired client to view the roaming information of the client.
From the roaming information, you can see that the client accesses the WLAN through AP 1,
and the BSSID of AP 1 is 000f-e27b-3d90 (see
Figure 505 Client status before intra-AC roaming
d.
Click Refresh.
On the Roam Information page that appears, you can see that the client is connected to the
WLAN through AP 2, and the BSSID of AP 2 is 000f-e233-5500.
Figure 506 Client status after intra-AC roaming
2.
View the Roam Status field:
a.
Select Summary > Client from the navigation tree.
You are placed in the Detail Information tab.
b.
Click the desired client.