H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 520)

499
power is changed, and the new channel or power keeps unchanged within the specified holddown time.
This mechanism continues.
NOTE:
Before entering the Radio Group page, configure channel or power adjustment on the Parameters tab.
1. Select Radio > Calibration from the navigation tree.
2. Click Radio Group.
3. Click Add.
The Radio Group page appears.
Figure 532 Configuring a radio group
4. Configure the radio group as described in Table 159 , and click Apply.
Table 159 Configuration items
Item Description
Group ID ID of the radio group
Description
Description for the radio group.
By default, a radio group has no description.
Channel
Holddown
Interval
Specify that the current channel keeps unchanged within the specified time after a
channel adjustment (automatic or initial channel selection).
IMPORTANT:
The AC immediately selects another channel when it detects any radar signals on the
current channel, and then resets the channel holddown timer.
Power
Holddown
Interval
Specify that the current power keeps unchanged within the specified time after a
power adjustment (automatic power adjustment).