H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 166)

145
Figure 107 Network diagram
Configuring the AC (SNMP agent)
1. Enable SNMP agent:
a. Select Device > SNMP from the navigation tree.
b. Select the Enable option to enable the SNMP agent, and select v3 for SNMP Version, as shown
in Figure 108 .
c. Click Apply.
Figure 108 Enabling SNMP agent
2. Configure an SNMP view:
a. Click the View tab.
b. Click Add.
The page in
Figure 109 appears.
c. Enter view1 in the field.
d. Click Apply.
The page in
Figure 110 appears.
e. Select the Included radio box, enter the MIB subtree OID interfaces, and click Add.
f. Click Apply.
A configuration progress dialog box appears.
1.1.1.2/24
AC
Agent
NMS
Vlan-int2
1.1.1.1/24