H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 307)

286
Figure 264 Adding basic ACL
e. Click the Basic Setup tab.
f. Select 2001 for ACL.
g. Select Permit for Action, as shown in Figure 265 .
h. Click Apply.
Figure 265 Configuring a rule for basic ACL
3. Configure the NAT address pool:
a. Select Network > NAT from the navigation tree.
The Dynamic NAT page appears.
b. Click Add in the Address Pool area.
The Add NAT Address Pool page appears.
c. Enter 1 for Index.
d. Enter 5.5.5.9 for Start IP Address.
e. Enter 5.5.5.11 for End IP Address.
f. Click Apply.