H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 690)

669
Item Description
DSCP
Define a rule to match DSCP values.
If multiple rules are configured for a class, the new configuration does not
overwrite the previous.
You can configure up to eight DSCP values at a time. If multiple identical DSCP
values are specified, the system considers them as a single value. The
relationship between different DSCP values is OR. After configuration, all the
DSCP values are arranged in ascending order automatically.
IP Precedence
Define a rule to match IP precedence values.
If multiple rules are configured for a class, the new configuration does not
overwrite the previous.
You can configure up to eight IP precedence values at a time. If multiple
identical IP precedence values are specified, the system considers them as a
single value. The relationship between different IP precedence values is OR.
After configuration, all the IP precedence values are arranged in ascending
order automatically.
Classifier
Define a rule to match a QoS class.
TIP:
This configuration item is not supported.
Inbound Interface
Define a rule to match inbound interfaces.
TIP:
This configuration item is not supported.
RTP Port
Define a rule to match a range of RTP ports.
Specify the start port in the from field and the end port in the to field.
TIP:
This configuration item is not supported.
Dot1p Service 802.1p
Define a rule to match the service 802.1p precedence values.
If multiple rules are configured for a class, the new configuration does not
overwrite the previous.
You can configure up to eight Dot1p values at a time. If multiple identical Dot1p
values are specified, the system considers them as a single value. The
relationship between different Dot1p values is OR. After configuration, all the
Dot1p values are arranged in ascending order automatically.
TIP:
This configuration item is not supported.