H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 707)

686
Figure 713 Adding a policy
9. Configure classifier-behavior associations for the policy:
a. Click the Setup tab.
b. On the page as shown in Figure 435 , select policy1, select class1 in the Classifier Name list,
and select behavior1 in the Behavior Name list.
c. Click Apply.
Figure 714 Configuring classifier-behavior associations for the policy
10. Apply the QoS policy in the inbound direction of the wireless service named service1:
a. Select QoS > Service Policy from the navigation tree.
b. Click the icon for wireless service service1.
c. On the page as shown in Figure 436 , select the Inbound Policy option, and select policy1 from
the following list.
d. Click Apply.