9400 highline | parameter setting & configuration – Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) User Manual
Page 228
9400 HighLine | Parameter setting & configuration
Basic drive functions
Brake control | Grinding the brake
228
Firmware 1.37 - 09/2006
L
Sequence
When all conditions mentioned are fulfilled, the grinding process can be started by setting
the input BRK_bBrakeGrindIn to TRUE.
[9-19] Sequence of the grinding operation
n
: Grinding speed
o
: Acc./dec. time - grinding
p
: Grinding ON time
q
: Grinding OFF time
CINH = controller inhibit
r
After the grinding speed has been
reached, the friction partners in the
brake are ground by a pulse-type
control.
r
After the brake has been closed and
opened ten times, the direction of
rotation changes and grinding in the
opposite direction is carried out.
r
By resetting the input
BRK_bBrakeGrindIn to FALSE the
grinding process can be aborted.
t
t
t
t
BRK_bBrakeGrindIn
CINH
n
10 x
10 x