Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 35)

L
Firmware 1.37 - 09/2006 35
9400 HighLine | Parameter setting & configuration
Drive interface
Parameter setting
4.2 Parameter setting
4.2.1 Machine parameters
The global machine constants ("machine parameters") are set in the »Engineer» on the
Application parameters tab in the Overview  Drive interface  Machine parameters
dialog level:
O
Tip!
Detailed information on the different machine parameters can be obtained from
the following subchapters.