Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 566)

9400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C00270
566 Firmware 1.37 - 09/2006
L
C00270
C00271
C00272
C00273
C00274
Parameter | Name:
C00270 | Freq. - current setpoint filter
Data type: UNSIGNED_32
Index: 24305
d
= 5EF1
h
Setting range (min. value | unit | max. value)
1.0 Hz 1000.0
Subcodes Lenze setting Information
C00270/1 200.0 Hz Freq. current setpoint filter 1
C00270/2 400.0 Hz Freq. current setpoint filter 2
; Read access ; Write access CINH PLC STOP No transfer COM MOT Scaling factor: 10
Parameter | Name:
C00271 | Width - current setpoint filter
Data type: UNSIGNED_32
Index: 24304
d
= 5EF0
h
Setting range (min. value | unit | max. value)
0.0 Hz 500.0
Subcodes Lenze setting Information
C00271/1 20.0 Hz Width current setp. filter 1
C00271/2 40.0 Hz Width current setp. filter 2
; Read access ; Write access CINH PLC STOP No transfer COM MOT Scaling factor: 10
Parameter | Name:
C00272 | Depth - current setpoint filter
Data type: UNSIGNED_32
Index: 24303
d
= 5EEF
h
With the setting "0 dB" the current setpoint filter is deactivated
Setting range
(min. value | unit | max. value)
0 db 100
Subcodes Lenze setting Information
C00272/1 0 db Depth current setp. filter 1
C00272/2 0 db Depth current setp. filter 2
; Read access ; Write access CINH PLC STOP No transfer COM MOT
Parameter | Name:
C00273 | Moment of inertia
Data type: UNSIGNED_32
Index: 24302
d
= 5EEE
h
Setting range (min. value | unit | max. value)
0.00 kg cm² 10000.00
Subcodes Lenze setting Information
C00273/1 0.14 kg cm² Motor moment of inertia
C00273/2 0.00 kg cm² Load moment of inertia
; Read access ; Write access CINH PLC STOP No transfer COM MOT Scaling factor: 100
Parameter | Name:
C00274 | Max. acceleration change
Data type: UNSIGNED_32
Index: 24301
d
= 5EED
h
Setting range
(min. value | unit | max. value)
Lenze setting
0.0 %/ms 400.0 400.0 %/ms
; Read access ; Write access CINH PLC STOP No transfer COM MOT Scaling factor: 10