Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 367)

L
Firmware 1.37 - 09/2006 367
9400 HighLine | Parameter setting & configuration
TAs for positioning tasks
13 TAs for positioning tasks
The technology applications described in this chapter are available for positioning tasks.
Technology application/application ranges Required license/delivery
TA "Multi-purpose positioning" (C 371)
Note: In this TA the sequence control is carried out through the controller.
• Transport units
• Rotary tables
• Storage and retrieval units
• Feed drives
• Dosing machines
• Hoists
License stage Motion Control
TopLevel or higher required.
The technology application can be
selected in the »Engineer«
application catalog.
TA "Table positioning" (C 411)
Note: This TA requires an external sequence control.
• Transport units
• Rotary tables
• Storage and retrieval units
• Feed drives
• Dosing machines
• Hoists
Available in every license stage.
The technology application can be
selected in the »Engineer«
application catalog.