Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 615)

L
Firmware 1.37 - 09/2006 615
9400 HighLine | Parameter setting & configuration
Parameter reference
Parameter list | C02521
C02521
C02522
C02523
C02524
C02525
C02526
Parameter | Name:
C02521 | Gearbox fact. denom. motor
Data type: INTEGER_32
Index: 22054
d
= 5626
h
Drive interface
Setting range (min. value | unit | max. value) Lenze setting
1 2147483647 1
; Read access ; Write access ; CINH PLC STOP No transfer COM MOT
Parameter | Name:
C02522 | Gearbox fact. numer. load
Data type: INTEGER_32
Index: 22053
d
= 5625
h
Drive interface
Setting range (min. value | unit | max. value) Lenze setting
1 2147483647 1
; Read access ; Write access ; CINH PLC STOP No transfer COM MOT
Parameter | Name:
C02523 | Gearbox fact. denom. load
Data type: INTEGER_32
Index: 22052
d
= 5624
h
Drive interface
Setting range (min. value | unit | max. value) Lenze setting
1 2147483647 1
; Read access ; Write access ; CINH PLC STOP No transfer COM MOT
Parameter | Name:
C02524 | Feed constant
Data type: UNSIGNED_32
Index: 22051
d
= 5623
h
Drive interface
Setting range (min. value | unit | max. value) Lenze setting
0.0001 Unit/rev. 214748.3647 360.0000 Unit/rev.
; Read access ; Write access ; CINH PLC STOP No transfer COM MOT Scaling factor: 10000
Parameter | Name:
C02525 | Unit
Data type: UNSIGNED_32
Index: 22050
d
= 5622
h
Drive interface
Selection list (Lenze setting printed in bold) Information
0 User-defined The text entered in C02526 is displayed for the unit.
1 Incr.
2 μm
3 mm
4 M
5 inch
6 yard
7 °
; Read access ; Write access ; CINH PLC STOP No transfer COM MOT
Parameter | Name:
C02526 | User-defined unit
Data type: VISIBLE_STRING
Index: 22049
d
= 5621
h
User-defined unit which is displayed when C02525 ="0" is selected.
Drive interface
; Read access ; Write access ; CINH PLC STOP No transfer COM MOT