Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 536)

9400 HighLine | Parameter setting & configuration
Diagnostics & error analysis
Error messages of the operating system
536 Firmware 1.37 - 09/2006
L
Maximum speed has been exceeded [0x00b80010]
Maximum acceleration has been exceeded [0x00b80011]
Response (Lenze setting printed in bold) Setting: C02716/3 (; Adjustable response)
: None System fault ; Fault ; Trouble ; Quick stop by trouble ; Warning locked ; Warning ; Information
Cause Remedy
The max. speed parameterised in C02703 has been
exceeded.
• Reduce speed.
• Increase maximum speed ( C02703 ).
• Deactivate monitoring of the limit values by the basic
function "Limiter".
Response (Lenze setting printed in bold) Setting: C02716/3 (; Adjustable response)
: None System fault ; Fault ; Trouble ; Quick stop by trouble ; Warning locked ; Warning ; Information
Cause Remedy
The max. acceleration parameterised in C02705 has
been exceeded.
• Reduce acceleration.
• Increase maximum acceleration ( C02705 ).
• Deactivate monitoring of the limit values by the basic
function "Limiter".