Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 394)

9400 HighLine | Parameter setting & configuration
TAs for positioning tasks
TA "Multi-purpose positioning" | Profile data management
394 Firmware 1.37 - 09/2006
L
r If e.g. in case of a profile chaining, several profiles are to be executed with the same
speed, the corresponding profile parameters "speed" can all refer to the same table
position.
r For an easier assignment and identification of the entered values, each table position
can be optionally provided with a comment in the »Engineer«.