Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 318)

9400 HighLine | Parameter setting & configuration
TAs for interconnection via electrical shaft
TA "Electronic gearbox" | Following error monitoring
318 Firmware 1.37 - 09/2006
L
12.2.9 Following error monitoring
In the Lenze setting the following error monitoring is active.
r Parameter setting: Tab Application parameter  Dialog level Overview  Electronic
gearbox  Following error monitoring
r Configuration: Tab FB editor  FB MonitFollowError
n Switching threshold
o Hysteresis
Parameters Lenze setting
Value Unit
C03911 Switching threshold 1.0000 Unit
C03916 Hysteresis 0.5000 Unit
Control inputs of the function Signal configuration
Lenze setting Control input (Multiplexer parameters)
TRUE  Activate following error monitoring C03058/21
j
Œ
