Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 448)

9400 HighLine | Parameter setting & configuration
Diagnostics & error analysis
Error messages of the operating system
448 Firmware 1.37 - 09/2006
L
15.6.3 Error list
The following sections describe all error messages of the controller operating system.
r The error messages are described in ascending order of the hexadecimal number
resulting from the Module-ID  and the Error-ID .
O
Tip!
The index of this online documentation which contains all error numbers (in the
entry "Error numbers") and all error messages allows you to quickly find a
description of an error message.
Structure of the system error message descriptions
All error message descriptions have a uniform structure:
1. Error message and associated module ID & error ID in hexadecimal format.
2. Information on the Response to the error message
3. Information on the cause and possible remedies.
Note!
Please observe that depending on the Instance-ID and the selected Response the
first two hexadecimal places of the hexadecimal number indicated in the
internal history buffer ( C00168 ) may differ from the following error messages.
Example:
For information about the error message for the value "0x20077002" indicated
under C00168, please see the index entry "error number 0x00077002".
Bit 31 16 25 26 28 29 0 15
0...F 0...F 0...F 0...F 0...F 0...F 0...3 0 0x
2 3