Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 36)

9400 HighLine | Parameter setting & configuration
Drive interface
Parameter setting
36 Firmware 1.37 - 09/2006
L
4.2.1.1 Mains voltage
Via the Mains voltage list field (
C00173 ) the mains voltage for the drive controller is set.
r If you set a mains voltage with adjustable threshold for undervoltage ("LU adjustable"),
this undervoltage threshold can be set in the Undervoltage threshold (LU) input field
( C00174 ).
r In the Resp. to DC bus overvoltage list field ( C00600 ) the response to the DC-bus
overvoltage can be selected.
O
Tip!
The chapter "Rated data" in the Hardware Manual informs which device type has
which permissible device utilisation at which mains voltage and switching
frequency.
See also: Monitoring of the device utilisation (C 43)
Note!
Changing the setting in C00173 also affects the permissible device utilisation!