Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 540)

9400 HighLine | Parameter setting & configuration
Parameter reference
Structure of the parameter descriptions
540 Firmware 1.37 - 09/2006
L
16.1.3.3 Parameters with bit-code setting
Description structure
Parameter setting in the »Engineer«
r The »Engineer« uses a dialog box for parameter setting in which the individual bits can
be set or reset or, alternatively, the value can be entered as a decimal or hexadecimal
value:
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Value is bit-coded:
Bit 0
...
Bit 31
; Read access ; Write access CINH PLC STOP No transfer COM MOT