Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 498)

9400 HighLine | Parameter setting & configuration
Diagnostics & error analysis
Error messages of the operating system
498 Firmware 1.37 - 09/2006
L
No heartbeat signal detected [0x00910002]
Heartbeat not periodic [0x00910003]
Internal error: See C00180 [0x00910004]
Internal error: See C00180 [0x00910005]
Internal error: See C00180 [0x00910006]
Internal error: See C00180 [0x00910008]
Internal error: See C00180 [0x00910009]
Response (Lenze setting printed in bold)
None : System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error If the error occurs frequently, please contact Lenze.
Response (Lenze setting printed in bold)
None : System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error If the error occurs frequently, please contact Lenze.
Response (Lenze setting printed in bold)
None : System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error If the error occurs frequently, please contact Lenze.
Response (Lenze setting printed in bold)
None : System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error Please contact Lenze.
Response (Lenze setting printed in bold)
None : System fault Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Divisor of division was "0". Exchange application.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error If the error occurs frequently, please contact Lenze.
Response (Lenze setting printed in bold)
None System fault : Fault Trouble Quick stop by trouble Warning locked Warning Information
Cause Remedy
Internal error If the error occurs frequently, please contact Lenze.