Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 443)

L
Firmware 1.37 - 09/2006 443
9400 HighLine | Parameter setting & configuration
Diagnostics & error analysis
Error messages of the operating system
15.6 Error messages of the operating system
This chapter describes all error messages of the controller operating system and possible
causes & remedies.
O
Tip!
All error messages are saved in chronological order in the logbook. For detailed
information about the logbook, please see the chapter "Diagnostics & error
analysis". Logbook
(C 436)
15.6.1 Format of the error numbers saved in the fault memory
If an error occurs in the controller, a 32-bit value will be saved in decimal format in the
internal history buffer ( C00168 ) which contains the following information:
[15-4] Structure of the error number
 Response
 Instance-ID
 Module ID
 Error ID
2 1 0 3
Bit 31 16 25 26 28 29 0 15