Lenze E94AxHE Servo Drives 9400 HighLine (Firmware 01-37) - Manual (Page 541)

L
Firmware 1.37 - 09/2006 541
9400 HighLine | Parameter setting & configuration
Parameter reference
Structure of the parameter descriptions
16.1.3.4 Parameters with subcodes
Description structure
Parameter setting in the »Engineer«
r The »Engineer« parameter list lists all subcodes separately:
r The parameters are set as described in the previous chapters.
Parameter | Name:
Cxxxxx | _____________
Data type: _______
Index: _______
Description
Setting range
(min. value | unit | max. value)
Subcodes Lenze setting
Cxxxxx/1
Cxxxxx/2
Cxxxxx/3
Cxxxxx/4
; Read access ; Write access CINH PLC STOP No transfer COM MOT