Adding a view, Deleting a view – H3C Technologies H3C Intelligent Management Center User Manual
Page 101
87
•
Row Index: Start row number of the widget. Enter a number in the Row Index field or modify the
value by clicking
or
.
•
Column Index: Start column number of the widget. Enter a number in the Column Index field or
modify the value by clicking
or
.
•
Row Spans: Total rows of the widget. Enter a number in the Row Spans field or modify the value by
clicking
or .
•
Column Spans: Total columns of the widget. Enter a number in the Column Spans field or modify the
value by clicking
or
.
On the panel, the cells covered by a widget depend on the properties of the widget. If the rows or
columns counted from the start row or column number of the widget are less than the row or column
spans, the widget covers a single cell only, and has only part of its data displayed on the big screen.
H3C recommends you to use the mouse pointer to adjust the widget positions and sizes.
Adding a view
An operator, who can be an administrator, a maintainer, or a viewer, can configure up to ten views and
cannot manage views created by other operators.
To add a view:
1.
Navigate to the view configuration window:
a.
Point to the icon located at the top of the left navigation tree.
A list of predefined and user-defined favorites appears.
b.
Point to the Display Tiling folder option.
The popup list appears.
c.
Click
Configuration in the popup list.
The view configuration window appears.
2.
Click New View
in the command area on the right in the view configuration
window.
The Add View window appears.
If the current operator already adds 10 views, IMC displays a message, prohibiting the operator
from adding more views.
3.
Enter the name of the view in the View Name field. The name need not be unique.
4.
Click OK.
The view you have added appears on the view configuration window.
Deleting a view
To delete a view:
1.
Navigate to the view configuration window:
a.
Point to the icon located at the top of the left navigation tree.
A list of predefined and user-defined favorites appears.
b.
Point to the Display Tiling folder option.
The popup list appears.
c.
Click
Configuration in the popup list.
The view configuration window appears.