H3C Technologies H3C Intelligent Management Center - Manual (Page 381)

367
• Up/Down Alarm Filter: Contains the interface up/down alarm filter setting of the associated
interface: Filter, No Filter, or System Settings (see " System settings "). For information about setting
an interface up/down alarm filter, see " Using batch mode to modify interface up/down alarm
filter ."
• Interface Link Type: Contains the link type of the associated interface. This parameter identifies the
type of the peer device to which the interface connects. If the interface is not connected to any peer
device, this field displays Disconnected Interface.
If the Interface Group list contains multiple entries, the following navigational aids may appear:
{
Click to page forward in the Interface List.
{
Click to page forward to the end of the Interface List.
{
Click to page backward in the Interface List.
{
Click to page backward to the front of the Interface List.
4. Click 8, 15, 50, 100, or 200 from the right side of the main pane to configure how many items per
page you want to view.
You can only view devices that they have been granted management access to.
5. To access, the Interface Details page, click the link in the Interface Description field for the interface
you want to view details for.
The Interface Details page appears.
Interface details page
The Interface Details page is a rich resource that provides you and you with quick and easy access to
important interface information as well as links to interface configuration options.
The Interface Details section provides the following information on the selected interface.
Interface details page
• Interface Index: Contains the unique index value for the associated interface.
• Interface Type: Identifies the type of interface as defined by its physical/link protocol.
• Interface Description: Provides a description for the interface.
• Management Status: Contains an active icon denoting the current management status for the
interface.
• Operational Status: Contains an active icon denoting the current operational status for the
associated interface.
• Speed (bps): Contains the speed, in bits per second of the associated interface.
• User-Defined Speed (bps): Contains the user-defined speed, in bits per second of the interface.
• Interface Alias: Contains the name of the interface that has been configured on the device. For
information on configuring interface alias, refer to the vendor's documentation.
• MAC Address: Contains the MAC address for the associated interface.
• MTU: Contains the maximum size of IP packets processed by this interface.
• Last Change: Contains the time when the interface status was last changed (for example,
plug/unplug the network cable).
• Interface Up/Down Alarm Filter: Identifies whether or not there are system defined or user defined
filters in place for filtering out Interface up and down traps for the selected interface.
• Duplex Mode: Contains the duplex mode of the associated interface: Half, Auto, or Full.