Modifying flow template definitions, Deleting flow template definition – H3C Technologies H3C Intelligent Management Center User Manual
Page 920
906
The template type, Basic, is selected by default.
6.
Click the checkboxes to the left of the parameters that you want to add to the flow template in
Set Parameters section:
{
Address Type: Allows you set the address type.
{
Precedence Type: Allows you to set the type of precedence.
{
Protocol Type: Allows you to set the protocol type.
7.
Click OK.
Modifying flow template definitions
To modify a flow template to the selected device:
1.
Navigate to ACL Devices:
a.
Click the Service tab from the tabular navigation system on the top.
b.
Click ACL Management section of the navigation tree on the left.
c.
Click the ACL Devices link located under ACL Management on the navigation tree on the left.
The ACL Devices page appears and the deployment ACL Devices list displays in this page.
2.
Click the icon
in the ACL Configuration field for the device for which you want to view and
manage the ACL configuration.
The ACL Device configuration page appears.
3.
Click the Flow Template Definitions tab.
The flow templates that already exist on the device display in a list below the Flow Template
Definitions tab.
4.
Click the icon in the Modify field of the Flow Template Definitions list associated with the entry
you want to modify.
The Modify Flow Template Definition page appears.
5.
In Set Parameters section, click the checkbox to the left of the parameter that you want to add
to the flow template or uncheck the boxes to the left of the parameters that you want to remove from
the template:
{
Address Type: Allows you set the address type.
{
Precedence Type: Allows you to set the type of precedence.
{
Protocol Type: Allows you to set the protocol type.
6.
Click OK.
Deleting flow template definition
To delete a flow template to the selected device:
1.
Navigate to ACL Devices:
a.
Click the Service tab from the tabular navigation system on the top.
b.
Click ACL Management section of the navigation tree on the left.
c.
Click the ACL Devices link located under ACL Management on the navigation tree on the left.
The ACL Devices page appears and the deployment ACL Devices list displays in this page.
2.
Click the icon
in the ACL Configuration field for the device for which you want to view and
manage the ACL configuration.