H3C Technologies H3C Intelligent Management Center - Manual (Page 356)

342
{
Disk Name—Name of the disk in the card.
{
Quota (%)—Maximum percentage of the memory that MDC can use.
{
Quota (KB)—Maximum amount of the memory that MDC can use. The value equals the total
memory size multiplied by Quota (%).
{
Reserved (KB)—Minimum amount of the memory that must be reserved for the MDC.
{
Used (KB)—Amount of the memory that is used by the MDC.
{
Available (KB)—Amount of the memory that is available for the MDC. If the amount of the free
memory is smaller than Quota (KB) minus Used (KB), the amount of the available memory for
the MDC is that of the free memory. If the amount of the memory is larger than Quota (KB) minus
Used (KB), the amount of the available memory for the MDC equals Quota (KB) minus Used
(KB).
{
Modify—Click the Modify icon to modify the maximum memory percentage for an MDC.
Modifying the maximum memory percentage for an MDC
1. Access the MDC Management page.
2. Click the Memory Management tab.
3. Click the Modify icon for the MDC for which you want to modify the maximum memory
percentage.
The Modify Quota page appears.
4. Enter a new memory percentage in the Quota (%) field.
5. Click OK.
Viewing MDC CPU management details
1. Access the MDC Management page.
2. Click the CPU Management tab.
CPU Management List contents
{
Slot—Description of the card.
{
Chassis No—Number of the chassis to which the card belongs.
{
Slot No—Number of the slot to which the card belongs.
{
MDC Name—Name of the MDC that is authorized to use the card. The default MDC always
uses the name Admin.
{
CPU Weight—Weight for the CPU resources that the MDC can use in the card. The system
allocates CPU resources based on the CPU weights of all MDCs that share the same CPU. The
default MDC has a CPU weight of 10 in any card.
{
CPU Usage—Percentage of the CPU resources that are used by the MDC in the card.
{
Modify—Click the Modify icon to modify the CPU weight for an MDC.
Modifying the CPU weight for an MDC
1. Access the MDC Management page.
2. Click the CPU Management tab.
3. Click the Modify icon for the MDC for which you want to modify the CPU weight.
The Modify Weight page appears.
4. Enter a new CPU weight in the CPU Weight field.
5. Click OK.