H3C Technologies H3C Intelligent Management Center - Manual (Page 412)

398
a. Click the Resource tab from the tabular navigation system on the top.
b. Click View Management on the navigation tree on the left.
c. Point to Device View under View Management from the navigation system on the left.
A floating menu of categorized device views appears.
2. Click the category of device view you want to access.
3. The Device List for the device category you choose appears.
4. Click Device View from the navigation system for the Device List for all devices.
Navigating to the device list from the IP view
To navigate to the Device List from the IP View:
1. Navigate to Resource > IP View > Subnet-<Subnet IP Address>:
a. Click the Resource tab from the tabular navigation system on the top.
b. Click View Management on the navigation tree on the left.
c. Point to IP View under View Management from the navigation system on the left.
d. A floating menu of all IP views appears.
e. Click the IP subnet view you want to access.
f. The Device List for the IP subnet you choose appears.
IMC displays all devices in the IP View in the Device List displayed in the main pane of the IP
View window.
Navigating to the device list from a custom view
To navigate to the Device List from a Custom View:
1. Navigate to Resource > Custom View > <View Name>.
a. Click the Resource tab from the tabular navigation system on the top.
b. Click View Management on the navigation tree on the left.
c. Point to Custom View under View Management from the navigation system on the left.
A floating menu of all custom views appears.
2. Click the custom view you want to access.
The Device List for the custom view you choose appears. IMC displays all devices in the Custom
View in the Device List displayed in the main pane of the Custom View.
Device list management options
From the Device List, you can add, remove, delete, manage, and unmanage devices as well as
synchronize and refresh data for device details.
In addition, you can select one or more devices from the Device List and then launch batch operations for
configuring SNMP, Telnet, and SSH settings as well as checking Telnet and SSH settings.
You can also launch batch operations for one or more devices from the Device List for configuring status
and configuration polling intervals, rebooting devices, saving device configurations, deploying software,
and backing up configurations.