H3C Technologies H3C Intelligent Management Center - Manual (Page 594)

580
Column heading Description Required
SnmpParaSecuMode
Security mode. The value can be:
• 1 for no authentication and no encryption
• 2 for authentication and no encryption
• 3 for authentication and encryption
The SnmpParaAuthScheme and SnmpParaPrivScheme columns
must have the same value as this column.
No
SnmpParaAuthScheme
Authentication mode. The value can be:
• 1 for none
• 2 for MD5
• 3 for SHA
No
SnmpParaAuthPassword Authentication password, which contains 32 characters at most. No
SnmpParaPrivScheme
Encryption mode. The value can be:
• 1 for none
• 2 for DES
• 19 for AES128
• 21 for AES256
No
SnmpParaPrivPassword Encryption password, which contains 32 characters at most. No
SnmpParaTimeOut Operation timeout period (in seconds), which is 4 by default. No
SnmpParaRetry Maximum number of SNMP retries allowed, which is 3 by default. No
PingDevType
Indicates whether or not the ping operation is supported. The value
can be:
• 1 for yes
• 0 for no
No
changTelnet
Indicates whether or not the device's Telnet parameters are different
from those in the existing configuration file on the device. The value
can be:
• 0 for no
• 1 for yes
No
TelnetStyle
Telnet type. The value can be:
• 0 for password
• 1 for username+password
• 2 for super password
• 3 for password+super password
• 4 for username+password+super password
• 5 for no username+no password
• 6 for username+no password
No
TelnetUseName Telnet username. No
TelnetPassword Telnet password. No
TelnetSuperWord Telnet super password. No
TelnetTimeout Telnet timeout period, ranging from 1 to 60 seconds. No