Report tab – H3C Technologies H3C Intelligent Management Center User Manual
Page 84
70
Figure 32 Alarm tab
The Alarm tab is IMC portal into the reporting of faults on the network infrastructure. IMC lists real time
alarms or faults, sorted by most recent in the main portion of the Alarm page.
From this page, you can drill down into individual alarm details by clicking the Description field of an
individual alarm.
You can also quickly access the device in alarm mode by clicking the Alarm Source of an individual
alarm. This navigates the operator to Device Details for the device in alarm mode.
The navigation tree has the following configuration and viewing options:
•
Real-Time Alarms—View, delete, and recover the recent 50 unrecovered alarms with the exception
of information alarms.
•
Root Alarms—View, delete, and recover the most recent important alarms with the exception of
information alarms.
•
All Alarms—View all alarms.
•
Faulty Devices—View devices grouped by device type that are currently reporting a fault or error.
•
Alarm Statistics—View statistical analysis of alarm distribution in real time.
•
TopN—View devices grouped by severity of alarm.
The navigation tree also has the following configuration and viewing options:
•
Alarm Settings—Configure alarm settings to include email and SMS notification, alarm forwarding
to IMC as well as to other management systems, and downstream alarm suppression.
•
Trap Management—Browse, filter traps, add and modify trap definitions within IMC.
•
Syslog Management—Browse, filter and configure Syslog events.
For more information about using features and functions under the Alarm tab, see "
Report tab
Real time and historical reports in IMC can be accessed by clicking the Report tab, shown in
,
of the tabular navigation system.