H3C Technologies H3C Intelligent Management Center - Manual (Page 731)

717
You can click multiple checkboxes to select multiple objects or conditions to alarm on. Each alarm
condition is listed in the Concerned Alarms field below the list.
15. Click Parameter Setting located to the right of the Concerned Alarm field and to set the parameters
for the Concerned Alarms. The Set Alarm Parameter dialog box appears.
All alarms that have parameters appear.
16. Click the trap name to expand the alarm parameters.
17. Input the value in the field right of the parameters name:
To set multiple values for a parameter, click the icon to add a line, or
To remove a line, click the icon , or
To restore a parameter that you have removed, enter the Set Alarm Parameter page again.
18. Click OK.
IMC determines whether to forward the received alarms according to the configured parameters.
19. To delete one or more alarm conditions, highlight the condition(s) and click Delete.
Not all alarms have parameters.
When you select multiple MIB objects or alarm conditions, the alarm conditions are evaluated and
performed as an OR operation. With OR operations, only one of the conditions that you select
must be true for the alarm notification rule to generate an email notification.
20. Confirm that the MIB objects or conditions you selected have populated the Concerned Alarms
field in the Add Mail Notification page.
21. Enter the hourly range in the Time Ranges field for each day of the week, using an hh:mm-hh:mm
format.
To exclude a day of the week, delete any values, including 00:00, from the hourly range for that
day.
22. Click OK.
Copying an email alarm notification rule
To copy an email alarm notification rule:
1. Navigate to Alarm Notification:
a. Click the Alarm tab from the tabular navigation system on the top.
b. Click Alarm Settings on the navigation tree on the left.
c. Click Alarm Notification under Alarm Settings from the navigation tree on the left.
2. Click the Copy icon in the Mail Notification list associated with the alarm rule you want to
copy.
3. Rename the rule by giving it a unique name.
4. Make any necessary modifications to the rule in the Copy Mail Notification page. For more
information about modifying a mail Notification, see "
Modifying an email alarm notification rule ."
5. Click OK.
Enabling/disabling an email alarm notification rule
To enable or disable an email alarm notification rule:
1. Navigate to Alarm Notification.
a. Click the Alarm tab from the tabular navigation system on the top.
b. Click Alarm Settings on the navigation tree on the left.