H3C Technologies H3C Intelligent Management Center - Manual (Page 262)

248
If a device of any other type exists, the floating menu displays the icon of the corresponding
device type. To enter the device list page for this type of device, click the icon.
Each category of device in the Device View is followed by a number that is enclosed with
square brackets []. This number represents the number of devices in that category.
The status of a Device View depends on the status of the devices in it. The color of the group
icon represents the highest severity or alarm setting of all devices in the category. The icon of
a device view is grayed out if there is no device in the view.
3. The following list contains all of the fields that are displayed for all device categories.
{
Status: Contains the latest status of the device. Status is determined by the highest severity or
alarm level for the device, when the device has one or more current alarms that has not been
cleared or recovered.
{
Device Label: Contains the IMC name for the device, which, by default, is the name assigned to
it by IMC in its device configuration. If a device is configured with a sysName, the sysName is
used as the Device Label unless the Device Label is manually configured. This field also contains
the IP address. The contents of the device label field serve as an active link for drilling down into
the Device Details page. This offers you convenient access to device management features for
the selected device.
You can modify the device label from the Device Details page. This changes IMC name or
label for the device in IMC only. It does not change the name of the device on the device itself.
{
Model: Contains device model information. If the device is managed for reachability using
ICMP only and thus no device model information is available, this field contains "ICMP."
{
IP Address: Contains the IP address of the device.
{
Device Category: Contains the device type, such as router, switch, and server.
{
Operation: Contains an icon that displays links to operational tasks for the associated device.
4. Customize the columns displayed in the Device List to add interested data to the Device List.
a. Click View in the upper part of the list, and select Customize Columns from the menu that
appears.
The Customize Columns window appears.
The columns that can be customized include:
{
Model
{
IP Address
{
Vendor
{
Device Category
{
CPU Usage (%)
{
Memory Usage (%)
{
Device Response Time (ms)
{
Device Unreachability (%)
{
Rx Rate(datagrams/s)
{
Fw Rate(datagrams/s)
{
Rx Discards(%)
{
Tx Discards(%)
b. Select the columns to be displayed and click OK. The selected columns and the data collected
within the last five minutes are displayed in the Device List.