H3C Technologies H3C Intelligent Management Center - Manual (Page 796)

782
a. Click the Service tab from the tabular navigation system on the top.
b. Click ACL Management section of the navigation tree on the left.
c. Click the Assistant link located under ACL Management on the navigation tree on the left.
d. Click the Service List option located in the Assistant Management portion of the Service List
page.
The Service List displays in the main pane of the page.
2. Click the icon in the Modify field associated with the service you want to modify.
The Modify Service page appears.
You cannot modify the name of a service once the service has been created.
3. Modify the description for the service as needed in the Description field.
4. To add a port number to the existing list, enter the new port number in the Port field.
A valid port entry includes port numbers in the range from 0-65535.
5. Click Add.
6. Do one of the following:
{
To enter more than one port, repeat Steps 4-5.
{
To remove a port number, select the port and click Delete.
{
To remove all ports in the list, click Delete All.
{
To enter more than one port, repeat this step.
{
To remove a port number, select the port. Click Delete.
{
To remove all ports in the list, click Delete All.
7. Click OK to accept your modifications to the service.
Deleting a service in the service lists
To delete a service using the ACL Assistant:
1. Navigate to Service List.
a. Click the Service tab from the tabular navigation system on the top.
b. Click ACL Management section of the navigation tree on the left.
c. Click the Assistant link located under ACL Management on the navigation tree on the left.
d. Click the Service List option located in the Assistant Management portion of the Service List
page.
The Service List displays in the main pane of the page.
2. Click the checkboxes to the left of the service name for the service(s) you want to delete.
3. Click Delete.
4. Click OK to confirm the deletion of the selected service(s).
Managing net address groups using the ACL assistant
In ACL Management, a Net Address Group is mnemonic for one or more IP address/subnet mask
combinations. Once you have created a Net Address Group in ACL Management using the ACL
Assistant, you can specify it when configuring source or destination IP addresses and subnet masks in a
template rule.