H3C Technologies H3C Intelligent Management Center - Manual (Page 256)

242
Column label Column contents/requirements
SnmpParaWrite
This field contains the SNMP write community name, a string of up to 32
characters. The default is private.
This field is optional.
SnmpParaContextName
This field contains the SNMPv3 context name, a string of up to 32 characters.
This field is optional.
SnmpParaSecurityUser
This field contains the SNMPv3 user name, a string of up to 32 characters.
Two users with the same name are considered as belonging to the same
SNMPv3 template. This field is applicable to only SNMPv3.
This field is optional.
SnmpParaSecuMode
This field contains the security mode. This value must match the
SnmpParaAuthScheme and SnmpParaPrivScheme values.
1 = no authentication and no encryption
2 = authentication but no encryption
3 = authentication and encryption
This field is optional.
SnmpParaAuthScheme
This field contains the Authentication mode.
1 = none
2 = MD5
3 = sha
This field is optional.
SnmpParaAuthPassword
This field contains the authentication password, a string of up to 32
characters.
This field is optional.
SnmpParaPrivScheme
This field contains the encryption mode.
1 = none
2 = DES
19 = AES128
20 = AES192
21 = AES256
This field is optional.
SnmpParaPrivPassword
This field contains the encryption password, a string of up to 32 characters.
This field is optional.
SnmpParaTimeOut
This field contains the timeout value in seconds, which is 4 by default.
This field is optional.
SnmpParaRetry
This field contains the number of retries, which is 3 by default.
This field is optional.
PingDevType
This field identifies whether or not the device responds to ping requests. The
field is 0 by default.
1 = the discovered device responds to Ping requests.
0 = the discovered device does not respond to Ping requests.
This field is optional.