H3C Technologies H3C Intelligent Management Center User Manual
Page 363
349
IMC displays all RMON Stat Group entries in the Stat Group list displayed in the main pane of the
RMON Stat Group page.
Stat group list
•
Index Contains unique index values for the associated Statistics Group instance. If a MIB object
contains more than one entry, indexes are used to uniquely identify each entry.
•
Port: Contains port name/description for the associated interface.
•
Received Bytes: Contains the number of received bytes for the associated interface for the most
recent polling cycle.
•
Received Packets: Contains the number of received packets for the associated interface for the most
recent polling cycle.
•
Owner: Contains the name of the owner of the RMON statistics collection that is configured when
you add the interface to Statistics group collection.
•
Status: Indicates whether or not the Stat Group collection is active for this interface.
•
Monitor Status: Indicates the status of monitor for this interface.
•
At a Glance: Shows the RMON statistics in the RMON diagram. You can select a time range to
query the RMON statistics within the specified time range.
If the RMON Stat Group List contains multiple entries, the following navigational aids may appear:
{
Click
to page forward in the Stat Group List.
{
Click
to page forward to the end of the Stat Group List.
{
Click
to page backward in the Stat Group List.
{
Click
to page backward to the front of the Stat Group List.
3.
Click 8, 15, 50, 100, or 200 from the right side of the main pane to configure how many items
per page you want to view.
You can only view devices that they have been granted management access to.
Adding RMON statistics group entries
To add interfaces to the RMON Statistics Group to enable data collection for the selected interfaces from
the Device Details page:
1.
Click the RMON link located under the Device Management section of the right navigation tree on
the selected device's Device Details page.
2.
Click the Statistics Group tab located at the top of the RMON Stat Group page.
IMC displays all RMON stat group entries in the Stat Group List displayed in the main pane of the
RMON Stat Group page.
3.
Click Add.
4.
Select the port or interface you want to collect RMON statistics for from the Port list.
5.
Enter the name of the person who owns this RMON Statistics Group collection in the Owner field.
6.
Click OK.
Deleting RMON statistics group entries
To delete interfaces from RMON statistics group collection for the selected device:
1.
Click the RMON link located under the Device Management section of the right navigation tree on
the selected device's Device Details page.
2.
Click the Statistics Group tab located at the top of the RMON Stat Group page.