Modify soap/http settings, Modify poll interval – H3C Technologies H3C Intelligent Management Center User Manual
Page 338
324
3.
Click OK to accept the SSH configuration. For more information about creating SSH templates, see
"
."
Modify SOAP/HTTP Settings
When IMC add-on Virtual Network Manger (VRM) module is installed and in use, you can modify the
SOAP/HTTP settings IMC uses to remotely access the selected device.
To modify SOAP/HTTP settings for the selected device from the Device Details page:
1.
Click the Modify SOAP/HTTP Settings link located under the Configure section of the right
navigation tree on the selected device's Device Details page.
For information on navigating to a device's Device Details page, see "
The modify SOAP/HTTP Parameters dialog box appears.
2.
Do one of the following:
{
To edit IMC configuration using templates, skip down to "
."
{
To edit the SOAP/HTTP parameters, verify that the radio button to the left of Edit
SOAP/HTTP Parameters is selected.
3.
Select the access URL protocol from the Protocol list.
4.
Enter the port number in the Port field.
5.
Enter access URL root path in the Root Path field.
6.
Enter the user name in the Username field.
7.
Enter the password in the Password field.
8.
Click the checkbox to the left of the Test connection to vManager/physical server, if you want to
do the testing.
9.
Click OK to accept the SOAP/HTTP configuration.
Using existing SOAP/HTTP Templates
To configure the SOAP/HTTP settings for this device using SOAP/HTTP templates:
1.
Click the radio button to the left of Select an Existing Template.
2.
Click the radio button to the left of the SOAP/HTTP template you want to use.
3.
Click OK to accept the SOAP/HTTP configuration. For more information about creating
SOAP/HTTP templates, see "
."
Modify poll interval
You can also modify the polling interval settings for status and configuration polling for the selected
device. Modifying the status or configuration polling interval influences directly how quickly IMC detects
problems with status or configuration; setting long polling intervals delays the amount of time it takes IMC
to detect a problem in the infrastructure and settings short polling intervals increases the resource
demand on IMC.
To modify polling interval settings for the selected device from the Device Details page:
1.
Click the Modify Poll Interval link located under the Configure section of the right navigation tree
on the selected device's Device Details page.
For information on navigating to a device's Device Details page, see "