H3C Technologies H3C Intelligent Management Center - Manual (Page 445)

431
a. Click the Resource tab from the tabular navigation system on the top.
b. Click Terminal Access on the navigation tree on the left.
c. Click Access Configuration under Terminal Access from the navigation tree on the left.
2. Click Switch Access Binding on the Access Configuration page.
The Switch Access Binding List appears.
3. Click Refresh to reload the Web page and review any updated information.
IP to MAC address binding
Using the IP/MAC Address Binding feature, you can bind an IP address to a MAC address within IMC
(not on the device). When IMC detects an invalid IP address and MAC address pairing, it generates an
alarm notifying you of this event. The benefits of this feature are as follows:
• IP addresses cannot be changed without notification of changes.
• Supports the centralized management of IP address resources.
• Helps defend against security threats.
You can bind IP addresses to MAC addresses manually or they can use the auto-scanning feature. With
the auto-scanning feature, IMC identifies IP address and MAC address combination pairs, which you
then can selectively apply binding to. IMC version 5.1 supports 5,000 IP address to MAC address
bindings. The following section provides details on IP to MAC address binding.
Viewing the IP/MAC binding list
To view the IP/MAC binding list:
1. Navigate to Resource > Access Configuration.
a. Click the Resource tab from the tabular navigation system on the top.
b. Click Terminal Access on the navigation tree on the left.
c. Click Access Configuration under Terminal Access from the navigation tree on the left.
2. Click IP/MAC Binding in the Access Configuration page.
The IP/MAC Binding List is displayed in the IP/MAC Binding page.
IP/MAC Binding List
• IP Address: Contains the IP address that has been allocated.
• MAC Address: Contains the MAC address for the device associated with the IP address.
• Owner: Contains the name of the IP address owner.
• Details: Contains a link to viewing the IP/MAC Binding details page for the associated IP/MAC
binding entry.
• Unbind: Contains a link for unbinding the IP address allocation from the MAC address.
If the IP/MAC Binding List contains enough entries, the following navigational aids are displayed:
{
Click to page forward in the IP/MAC Binding List.
{
Click to page forward to the end of the IP/MAC Binding List.
{
Click to page backward in the IP/MAC Binding List.
{
Click to page backward to the front of the IP/MAC Binding List.
3. Click 8, 15, 50, 100, or 200 from the right side of the main pane to configure how many items per
page you want to view.