H3C Technologies H3C Intelligent Management Center - Manual (Page 925)

911
• Deployment Order: Contains the deployment order selected by the creator of this task.
• Error Handling: Contains the manner in which ACL Management handles errors in the deployment
of the selected ACL and rule set based on the creator's configuration for error handling.
• Save to Startup File: Identifies whether or not ACL Management saves the running config to the
startup config on the device after the deployment has been completed.
• Execute: Contains the date and time stamp for the execution of this task.
The deploy details of detailed information
• Device: Contains the device label for the devices to which the ACL rule set was deployed. This field
serves as a link for navigating to the ACL Devices device information page. For more information,
see " Managing device ACL definitions ."
• Category: Identifies the type of ACL deployment task.
• Name: Contains the name of the ACL that was configured for deployment.
• Operation: Contains the type of operation configured for execution within the category specified.
• Preview Commands: Contains an icon for navigating to the dialog box that displays the
commands to be executed. If the task has completed, this field is not displayed.
Modifying an ACL deployment task
You can modify any task in the Task List that has not completed or that has paused.
To modify a deployment task:
1. Navigate to ACL Resource:
a. Click the Service tab from the tabular navigation system on the top.
b. Click ACL Management section of the navigation tree on the left.
c. Click the ACL Deployment link located under ACL Management on the navigation tree on the
left.
The ACL Deployment page appears and the deployment Task List displays in the lower half of
this page.
2. Click the icon in the Modify field of the deployment task you want to modify.
The Modify Task page appears with the default task name displayed in the Task Name field.
3. To enter a task name for this deployment task, delete the contents of this field and enter a new task
name.
A valid length for a task name is 1 – 32 characters. The task name cannot begin with a number
[0-9].
4. Enter a brief description for this deployment task in the Description field.
5. Select how you want IMC to execute the deployment of ACLs to every device in the deployment
task from the Deployment Order section of the Modify Task page by clicking the radio button
to the left the appropriate option:
{
Select Concurrent if you want ACL Management to deploy the ACL to multiple devices
simultaneously.
{
Select Sequential if you want ACL Management to deploy the ACL to one device at a time.
6. Select the strategy you want ACL Management to use should a problem arise in the deployment of
ACLs to devices from the Error Handling list. Options include: