H3C Technologies H3C Intelligent Management Center - Manual (Page 616)

602
1. Navigate to Service > Configuration Audit > Software Update.
a. Click the Service tab from the tabular navigation system on the top.
b. Click the Configuration Center on the navigation tree on the left.
c. Click Software Update under Configuration Audit on the left navigation tree. Expand the
section by clicking the expand button to the left of Configuration Audit.
The Software Update page appears.
2. Enter the following search criterion in the upper right of the page:
{
Device Name: To locate the configuration backup files for a particular device, enter a partial or
complete device label or name in the Device Name field.
3. Click to submit your filter criterion.
The results of your filter or search query are displayed in the Software Update list below.
Restoring a software file from the software update report page
The Restore button on the Software Update page provides quick link to the Deployment Guide wizard for
updating or restoring system software. For more information about using the Deployment Guide for
updating or restoring system software, see "
Restoring device software ."
Software baseline report
The Software Baseline Report provides you the ability to compare a device's most current system
software against its configured baseline system software file. IMC identifies when the current software file
does not match the configured baseline software.
IMC also provides the ability to restore selected files from the Software Baseline page for those devices
where current software does not match the baseline.
Viewing the software baseline report
To access the Software Baseline report:
1. Navigate to Service > Configuration Audit > Software Baseline.
a. Click the Service tab from the tabular navigation system on the top.
b. Click the Configuration Center on the navigation tree on the left.
c. Click Software Baseline under Configuration Audit on the left navigation tree. Expand the
section by clicking the expand button to the left of Configuration Audit.
The Software Baseline page appears.
Software baseline report
{
Device Name: Contains the device label or name.
{
Device Type: Contains the model information for the associated device.
{
Current Software: Contains the filename of the software currently running on the associated
device.
{
Baseline Software: Contains the name of the software file that is configured as the baseline
software for the associated device.
{
Audit Result: Contains the result of IMC comparison of the current software file and it's
configured baseline.
The value Identical indicates that the current software file matches the configured baseline
software file.