H3C Technologies H3C Intelligent Management Center - Manual (Page 148)

134
1. Navigate to System > SOAP/HTTP Template:
a. Click the System tab from the tabular navigation system on the top.
b. Click Resource Management on the navigation tree on the left.
c. Click SOAP/HTTP Template under Resource Management from the navigation system on
the left.
IMC displays all SOAP/HTTP templates in the SOAP/HTTP Template List displayed in the main
pane of the System > SOAP/HTTP Template window.
2. Click Add.
3. Enter the following information in the Add SOAP/HTTP Template page.
4. Enter a unique name for the SOAP/HTTP template name in the Template Name field.
You cannot modify the name of a template once the template has been created. To modify the
name, you must first delete the template and then recreate it with the new name.
5. From the list next to Access Type, select one of the following options:
{
SOAP—For VMware virtual network devices.
{
HTTP—For Citrix virtual network devices.
6. Select the protocol to match the SOAP/HTTP configuration on the managed devices from the
Protocol list.
Protocol options include http and https.
7. Enter the port number that is configured on managed devices in the Port field.
The default port number is 80 for http, or 443 for https.
8. Enter the root path that is configured on managed devices in the Root Path field.
The default setting is sdk.
9. Enter the username that is configured on managed devices in the Username field.
10. Enter the password that is configured on the managed devices in the Password field.
11. If you want to test whether the configured SOAP/HTTP Template can connect to a
vManager/physical server, click the Test connection to vManager/physical server checkbox, and
the Select button appears.
12. Click the Select button to select a vManager/physical server.
Adding devices by View
To add devices by view:
1. From the Select Devices dialog box, click the By View tab.
2. Expand the view you want to select devices from by clicking on the arrow to the left of the three
view options, IP View, Device View, or Custom View.
3. Click the view you want to select devices from the navigation tree on the left. The devices from the
group you click appear in the Devices Found field to the right of the navigation tree. You can select
devices from more than one group by clicking more than one group.
4. Highlight the devices you want to select from the Devices Found list and click the Add selected
button
to add them to the selected devices list.
5. To remove one or more devices, select them and click Remove selected .
6. Confirm that the devices you have found have been added by reviewing the Selected Devices list.
7. Click OK.