H3C Technologies H3C Intelligent Management Center - Manual (Page 214)

200
Then, the forged ping packets trigger the devices to send ARP broadcast packets, which can prevent
some devices and links from failing to be detected due to MAC address aging.
External Tool Settings
• SFTP Client: This parameter provides the complete directory of the executable SFTP client program
on the IMC server. It identifies the location of the SFTP client program. IMC uses the SFTP client
program to log in to the device and get or put files to the device. If this parameter is null, the default
client program ({IMC installation directory}/server/bin/psftp.exe for Windows and {IMC
installation directory}\server\bin\psftp for Linux) is used.
• SSH Client: This parameter provides the complete directory of the executable SSH client program on
the IMC server. It identifies the location of the SSH client program. IMC uses the SSH client program
to log in to the device. If this parameter is null, the default client program ({IMC installation
directory}/server/bin/plink.exe for Windows and {IMC installation directory}\server\bin\plink
for Linux) is used.
Work Time Settings
1. Select Yes or No from the Enable Work Time Settings list to enable or disable the work time settings.
The work time settings are disabled by default.
2. Select a time period from the Name list as the work period. This field appears only when the work
time settings are enabled. For information about configuring work time periods, see "
Work time
settings ."
3. Click OK.
Forward IMC Operation Logs in Syslogs
1. Select Yes or No from the Enable Forwarding of IMC Operation Logs in Syslogs list to enable or
disable forwarding of IMC operation logs in Syslog messages. The default setting is No.
2. Enter the IP address in the Syslog Server IP field. IMC sends Syslogs to this server.
3. Enter the port number in the Syslog Server Port field. The Syslog server uses this port to receive
Syslogs. The default setting is 514.
4. Click OK.
Configure browsers to save login usernames and passwords
1. Select Yes or No from the Configure browsers to save login usernames and passwords list to
enable or disable login username and password saving in browsers. The default setting is Yes.
Typically, a browser prompts you to save the password when you log in to IMC. Select No if you
do not want to save the username and password. If you select Yes and the configuration for
Configure browsers to save login usernames and passwords is No, the browser still saves the
username and password. In this case, for the Configure browsers to save login usernames and
passwords configuration (No) to take effect, manually clear the password saved in the browser.
2. Click OK.
Alarm statistics SMS configuration
1. Select Yes or No from the Enable Alarm Statistics SMS list to enable or disable the alarm statistics
SMS.
2. In the SMS Transmission Interval (minutes) field, enter a time interval value.
The time interval value specifies the interval at which IMC sends a notification SMS.