H3C Technologies H3C Intelligent Management Center - Manual (Page 893)

879
d. Enter up to eight Rule String/Mask/Excursion combinations.
11. Click OK to create the rule you have just configured.
Copying a rule in an ACL rule set
You can copy an existing rule in a rule set to a new rule in the same rule set and make modifications to
the new copy.
To copy an existing rule and make modifications to it:
1. Navigate to ACL Resource:
a. Click the Service tab from the tabular navigation system on the top.
b. Click ACL Management section of the navigation tree on the left.
c. Click the ACL Resource link located under ACL Management on the navigation tree on the left.
The ACL Resource list displays in the main pane of the ACL Resource page.
2. Click the ACL Identifier of the ACL for which you want to copy a rule.
The Rule Set List for the selected ACL displays in the main pane of the ACL Resource > <ACL
Resource Name (ACL Identifier)> page.
3. Click the icon in the Modify field associated with the rule you want to copy.
The Basic Info step of the Modify Rule Set page appears.
4. Click Next to advance to the next step in the Modify Rule Set page.
The Configure Time Range step of the Modify Rule Set page appears.
5. Click Next to advance to the next step in the Modify Rule Set page.
The Configure Rule step of the Modify Rule Set page appears with the rules for the associated rule
set displayed.
6. Click the icon in the Copy field associated with the rule you want to copy.
7. You can make any modifications to the copy of a rule that you can to the rule itself, including
creating new rules.
The steps for creating and modifying rules in a rule set vary by the ACL type to which the rule set
belongs. For more information about modifying rules, see "
Modifying ACL rule sets " and
specifically to the section that addresses how to modify the type of rule set you want to copy. For
example, if you have copied a rule from an advanced ACL, see " Modifying an advanced rule set ."
8. Click OK when you have finished modifying the copy to create the new copy.
Deleting rules from an ACL rule set
To delete one or more rules from a rule set:
1. Navigate to ACL Resource:
a. Click the Service tab from the tabular navigation system on the top.
b. Click ACL Management section of the navigation tree on the left.
c. Click the ACL Resource link located under ACL Management on the navigation tree on the left.
The ACL Resource list displays in the main pane of the ACL Resource page.
2. Click the ACL Identifier of the ACL from which you want to delete one or more rules.
The Rule Set List for the selected ACL displayed in the main pane of the ACL Resource > <ACL
Resource Name (ACL Identifier)> page.
3. Click the icon in the Modify field associated with the rule you want to copy.
The Basic Info step of the Modify Rule Set page appears.