H3C Technologies H3C Intelligent Management Center - Manual (Page 314)

300
The Import custom view dialog box appears.
3. In the Input File field, click Browse. Select an import file that is saved locally on the dialog box that
appears.
The import file must be a text file and the file size cannot be larger than 5MB.
Each custom view takes one row and the import file uses the following column contents: View
Name, IP Segment1, Segment2,,,,,,,IP SegmentN.
The field definitions for all columns in an import file are listed in
Table 7 . The table describes all
columns that can be used in a valid data import file and the rules for constructing a valid import file
using these column definitions.
Table 7 Import file column definitions
Column label Column contents/requirements
View Name
This column contains the custom view name.
This field is required.
IP Segment
This column contains one or more IP segments. The start and end IP
addresses for each IP segment are separated by a hyphen (-). All IP
segments are separated by commas.
This field is optional.
4. Click Import.
The page is updated with the results of the custom view import.
5. View the result of the custom view import and check whether or not all devices in the specified
segments have been added to the custom view.
Modifying custom views
To modify a custom view:
1. Navigate to Resource > Custom View.
a. Click the Resource tab from the tabular navigation system on the top.
b. Click Custom View on the navigation tree on the left. The list of custom views is displayed in the
Custom View List. If a custom view contains subviews, click the Expand icon next to the view
name to display the subviews.
2. Click the Modify icon associated with the custom view you want to modify.
3. Modify the name for the custom view in the View Name field.
4. Click the link to the right of the Upper-Level View field.
The window for selecting a view appears.
5. Select an upper-level view for the new view, and click OK.
The selected view appears at the right of the Upper-Level View field.
6. Reselect an option from the Automatically Add New Devices list.
• From Designated Rule: Adding newly added device to the view based on the designated rule. The
designated rule includes:
{
Designated Network: Automatically adding newly added devices whose IP addresses are on
the specified IP network segment to the view.
a. Enter the start IP address in the Start IP field.