H3C Technologies H3C Intelligent Management Center - Manual (Page 174)

160
• Authentication Port: Modify the port number used by the RADIUS server for authentication in the
field. The default port number is 1812.
• Shared Secret: Modify the shared secret for authentication packets. What is configured here must
match what is configured on the RADIUS server.
3. Click OK to confirm your modifications to the RADIUS service authentication configuration.
Configuring IMC to use LDAP authentication services
Only administrators or operators who are members of a group with the ADMIN privilege level can
configure LDAP authentication services. To configure LDAP authentication:
1. Navigate to System > Authentication Server.
a. Click the System tab from the tabular navigation system on the top.
b. Click Operator Management on the navigation tree on the left.
c. Click Authentication Server under Operator Management from the navigation system on
the left.
The Authentication Server configuration page appears.
2. Enter the following information in the Authentication Server page:
• LDAP Version: Select the LDAP version, 2 or 3 from the list. The option selected here must match the
configuration of the LDAP server.
• Server Type: Select LDAP server type from the list. IMC supports Generic LDAP Services as well as
Microsoft Active Directory.
• Server Address: Enter the IP address or host name of the LDAP Server in the field provided.
• Server Port: Enter the port number used by the LDAP server for authentication in this field. The
default port number is 389.
• Base DN: Enter the Base DN value to be used for communication with the LDAP server. The Base DN
must match what is configured on the LDAP authentication server.
• Admin DN: Enter the Admin DN value to be used for communication with the LDAP server. The
Administrator DN must match what is configured on the LDAP authentication server.
• Admin Password: Enter the Admin password to be used for communication with the LDAP server.
The admin password must match what is configured on the LDAP authentication server.
• Username Attribute: Enter the username attribute to be used for obtaining user information from the
LDAP server. The username attribute must match what is configured on the LDAP authentication
server.
• Require Security Connection (SSL): Specifies whether to use an SSL security connection for
connecting to the LDAP server.
• Authentication File Configure: This field is available only when you select Require Security
Connection (SSL). Click Authentication File Configure, click Browse on the dialog box that appears
to select a certificate, and then click Upload.
A certificate is an authentication file for securely connecting to the LDAP server. Without a
certificate, a security connection cannot be established to the LDAP server.
3. Click OK to confirm the LDAP service authentication configuration.
Modifying LDAP authentication service configuration
To modify an existing LDAP authentication service configuration:
1. Navigate to System > Authentication Server.
a. Click the System tab from the tabular navigation system on the top.