H3C Technologies H3C Intelligent Management Center - Manual (Page 208)

194
configuration backups. To access and configure the Alarm Generation Mode option for individual
devices in IMC:
1. Navigate to Service > Options:
a. Click the Service tab from the tabular navigation system on the top.
b. Click Configuration Center on the navigation tree on the left.
c. Click Options under Configuration Center on the left navigation tree.
The Options page appears.
2. Click the Backup Policy tab.
3. Click the radio button to the left of Alarm Generation Mode in the Set Type section.
4. Do one of the following:
If you do not want to configure one or more devices, skip to Step 5, or
If you want to configure one or more devices to use the Generate alarms if the configuration to be
backed up is different from the baseline backup policy, follow the steps below.
a. If you click the radio button to the left of All devices except the selected ones will generate
alarms in the Generate alarms if the configuration to be backed up is different from the
baseline section, IMC generates alarms for all devices that are not listed when their
configurations to be backed up are different from the baseline configurations.
b. If you click the radio button to the left of Only the selected devices will generate alarms in
the Generate alarms if the configuration to be backed up is different from the baseline section,
IMC generates alarms for all listed devices when their configurations to be backed up are
different from the baseline configurations.
c. Click Select Device to select devices for the backup policy.
5. Add devices by using either the View or Advanced query option. See " Adding devices by View "
and " Adding devices by Advanced query ."
To cancel the backup policy option for one or more devices:
1. Click the Delete icon to the right of each device.
All the devices that are not configured separately with the special setting adopt the global backup
policy.
2. Do one of the following:
If you do not want to configure one or more devices, skip to Step 3, or
If you want to configure one or more devices to use the Generate alarms if the configuration to be
backed up is different from the last backup policy, follow the steps below.
a. If you click the radio button to the left of All devices except the selected ones generate
alarms in the Generate alarms if the configuration to be backed up is different from the last
backup section, IMC generates alarms for all devices that are not listed when their
configurations to be backed up are different from the last configuration backups.
b. If you click the radio button to the left of Only the selected devices will generate alarms in
the Generate alarms if the configuration to be backed up is different from the last backup
section, IMC generates alarms for all listed devices when their configurations to be backed up
are different from the last configuration backups.
c. Click Select Device to select devices for the backup policy.
3. Add devices by using either the View or Advanced query option. See " Adding devices by View "
and " Adding devices by Advanced query ."
To cancel the backup policy option for one or more devices: