Modifying a work period – H3C Technologies H3C Intelligent Management Center User Manual
Page 228
214
If you select Enable, all existing special workdays appear in the special workday list.
10.
Select the desired special workdays from the list.
11.
Select workdays from holidays as needed:
•
Enable: Allows operators to select workdays from existing holidays.
•
Disable: Prohibits operators from selecting workdays from existing holidays.
If you select Enable, all existing holidays appear in the holiday list.
12.
Select the desired holidays from the list.
13.
Click OK.
Modifying a work period
To modify a work period:
1.
Navigate to System > Work Time Settings:
a.
Click the System tab from the tabular navigation system on the top.
b.
Click System Configuration section of the navigation tree on the left.
c.
Click
Work Time Settings under System Configuration from the navigation system on the
left.
The Work Time Settings page appears.
2.
Click the Workday tab.
3.
Click the Modify icon for the work period you want to modify.
The Modify Workday page appears.
4.
Enter the name of the work period in the Name field.
5.
Enter a start date of the valid time range of the work period in the Start Date field, or click the field
to select a start date. The valid date format is YYYY-MM-DD.
6.
Enter an end date of valid time range of the work period in the End Date field, or click the field to
select an end date. The valid date format is YYYY-MM-DD.
7.
Enter a description of the work period in the Description field.
8.
In the Work Time Settings area, configure the working time ranges of the workdays on a weekly
basis:
a.
Click Add to launch the Add Time Range window.
b.
Select the days in a week that you want to set as workdays. Options include Monday through
Sunday.
c.
Select the start time of the working time range in each workday from the Start Time list.
d.
Select the end time of the working time range in each workday from the End Time list.
e.
Click OK.
Repeat Steps a through e to add more working time ranges. Any two working time ranges
cannot overlap with each other.
f.
Click the Delete icon of a time range to delete the time range.
9.
Select workdays from special workdays as needed:
{
Enable: Allows operators to select workdays from existing special workdays.
{
Disable: Prohibits operators from selecting workdays from existing special workdays.
If you select Enable, all existing special workdays appear in the special workday list.
10.
Select the desired special workdays from the list.